赌博网盘口网址

Ranch
Welcome to our website!
Vertical shaft sand making machine
Vertical shaft sand making machine

    product description

    The vertical shaft sand making machine can also be called a composite crusher. Its crushing ratio is large, and the output particle size can be adjusted arbitrarily without being affected by the abrasion of the plate hammer and the lining plate. There is no screen bar setting, high crushing moisture content and mud content Large amount of material is not easy to be blocked; Adopt the elastic adjustment mechanism, the unbreakable materials can be discharged automatically without damage to the equipment; the bearings are arranged horizontally and have a long life, which can crush high temperature materials (such as cement clinker); vertical shaft sand The machine's rotor body has an excellent structure. When the material is broken, the rotor body is hardly worn. The rear cavity is provided with a screw rod or a hydraulic opening mechanism, and the wearing parts can be easily replaced without lifting equipment.

    Product advantages

    Working characteristics of vertical shaft sand making machine:
    (1) Simple and reasonable structure and low operating cost. Using the stone-on-stone principle, the wear is small.
    (2) High crushing rate and energy saving.
    (3) With fine crushing and coarse grinding functions.
    (4) It is little affected by the moisture content of the material, and the moisture content can reach about 8%.
    (5) The working noise is lower than 75 dB (db level), and the dust pollution is less.
    (6) Suitable for crushing medium and ultra hard materials.
    (7) The product is cube-shaped with high bulk density and minimal iron pollution.
    (8) The impeller self-lining has less wear and easy maintenance.
    Vertical shaft sand making machine types are: 1000 type, 1250 type, 1500 type, 1750 type, 2000 type and so on.

    working principle

    Principle of vertical shaft sand making machine: the effect of high-speed rotation centrifugal force of the material from the vertical impeller of the crusher, the surrounding height and the impact of other flows on other materials impinging at high speed on each crushing impeller material component, then they will form a vortex with the impeller and the casing Several times of material impact, friction and grinding, direct discharge from the bottom of the compound crusher through closed-loop control several times projection equipment to achieve the specified finished product size.

    Technical Parameters

    model Feeding strength Discharge strength Production capacity Motor Power Dimensions
    1000 type <50 8mm or less 20-40 45 2500 * 1200 * 2800
    Type 1250 <70 8mm or less 40-60 75-90 2700 * 1500 * 3100
    1500 <80 8mm or less 80-100 110-132 3800 * 2300 * 4500
    Type 1750 <80 8mm or less 100-150 160-200 4500 * 2300 * 5200
    2000 type <100 8mm or less 150-200 200-250 5000 * 2800 * 5700

    365网络赌博网 现金滚球真人代理 365正规靠谱赌博网 365真人网络赌场 真钱滚球平台盘口 现金真人滚球 澳门赌注网真人盘口 澳门赌注网真人 赌博网盘口app 365国际馆